Winegard AP 8703 Chromstar 2000 Series Pre Amplifier
Winegard AP 8703 Chromstar 2000 Series Pre Amplifier
Winegard AP 8703 Chromstar 2000 Series Pre Amplifier is used on your antenna to increase the signal to noise ratio. Clears the snow out of those distant TV stations. Generally the higher the gain the better the results but sometimes if there is a strong local station you may want a lower gain preamp or one that just amplifies UHF and passes the VHF. This pre-amplifier features 300 ohm input for convenience and easier installation. Universal housing can be used with any off-air TV antenna. Made of high impact ABS material, mast mounted for easy installation. Selectable FM trap reduces FM signals (88-108 MHz) -15 dB to prevent overload, also the tunable FM trap reduces a 3 MHz band width by -12 dB. Flexible polyethylene hinged cover on 300 ohm models keep connections clean, dry, weather-protected.
Features of the Winegard AP 8703 Chromstar 2000 Series Pre Amplifier
- Mast mountable TV antenna pre amplifier
- Used to overcome signal loss related to long cable runs, splitters, and junctions
- Input: 82 CH 300 Ohm
- Output: 75 Ohm
- Transistor burn-out virtually eliminated with specialized circuitry featuring fast recovery diode that protects against lightning caused pulses
- Amplifier is adjustable and switchable without opening the housing
- Selectable FM Trap
- 117 VAC UL and CSA approved power supply is included. (Does not include F-connectors.)
- Zinc-plated steel hardware, all mounting hardware included
- Mounts directly to TV antenna mast
- NOTE: Preamplifiers and/or amplifiers only amplify the signal your antenna receives. They cannot extend the receiving range of an antenna or help pull in signal. Also, DO NOT use the higher gain models within 35 miles of your transmitters.
Technical Information:
Noise: VHF 3.9 dB / UHF 3.9 dB
Gain: VHF 17 dB / UHF 19 dB
Maximum Total Input: (Microvolts): VHF 110,000 µV / UHF 93,000µV
Operating temperatures: -40° to +140° F