Terk BDS-P1
Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer

Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer

Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer

Terk BDS-P1 Indoor/Outdoor single diplexer combines one DBS feed and one antenna or cable TV signal. Designed for single-LNB dishes, it combines the two signals so you only have to run a single cable into your home. A second diplexer will separate the signals to run into your separate DBS and TV antenna inputs.

Features of the Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer

• Allows you to run one wire to a satellite receiver
• Combines your satellite and antenna or cable signals at the dish.
• Separates satellite and antenna or cable signals at the receiver
• High signal throughput reduces likelihood of satellite programming loss due to rain and snow-signal loss is virtually eliminated (less than 1.1dB at various frequencies)
• Fully grounded connections and in/out DC pass (950-2150MHz) protect A/V equipment and users against harm from electrical shorts
• Superior stop-band rejection prevents off-air VHF and UHF signals from leaking into the satellite port and degrading its performance
• Mounting screws included Single Diplexer

Technical Information:
Frequency Range: 54-2150MHz
Impedance: 75ohm matching
Insertion Loss:
Ant 1dB Typ
Sat 3dB Typ
Isolation:
Ant 30dB Typ
Sat 30dB Typ

Also Known As:
BDS.P1
BDS P1
BDS_P1
BDSP1

Required and Recommended Products for the Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer

Recommended Product(s):

Terk BDS-P1 Single LNB Indoor/Outdoor Diplexer Terk BSP-3 Premium 3 Way Splitter Terk BIA20 Indoor/Outdoor In-Line Amplifier Terk BDD-32 Premium Dual Diplexer Terk BMS-58 5x8 Integrated Satellite Multiswitch Terk BSP-2 Premium 2 Way Splitter Terk BMS-34 Premium 3x4 Multiswitch Terk BSP-4 Premium 4 Way Splitter