Eagle Aspen Pro Brand ROTR100 Programmable Antenna Rotator
Eagle Aspen Pro Brand ROTR100 Programmable Antenna Rotator Introducing the new Eagle Aspen single cable off air antenna rotator; model ROTR100. The days of having to run separate "3 conductor rotor wire" between the drive unit and the control unit are in the past. Pro Brand has developed the ROTR100 utilizing DiSEqC code that sends commands to control the drive unit along the same coaxial cable that brings the television signals from the off air antenna into the house. Optional pre-amplifier power can also be supplied via this same cable. Whether performing a new install or retrofitting an existing antenna system, the ROTR100 provides for a fast and easy installation. Additional features have been added making the entire system installer and user friendly.
Eagle Aspen Pro Brand ROTR100 Programmable Antenna Rotator Features:
One Cable carries off-air signals, rotator power, control & pre-amp power.Hall Sensor Control:The industry standard for satellite control is now applied to off-air position control. Unlike competitive units, this unit does not rely on timing. The Hall sensors count every motor revolution resulting is 2° accuracy.High Torque:120 inch lbs. of mechanical torque to handle up to a 133" boom length.Pre-amp Power:18VDC at up to 80 ma. When a pre-amp is not used, this is automatically sensed and the pre-amp power is switched off.Display & Control:The indoor controller features a 000° to 450° digital compass display. 1.25 total rotation (450°) to allow for easy pointing to stations that are either side of north. Several methods of antenna control are provided.99 programmable memory locations, which can be assigned the same number as the channel being receivedDirect Access to a location (e.g.180° for south)Up/down through the digital compass displayHandheld IR Remote:Software codes available on most higher end universal remote controls
HDTV Antennas
Amplifiers
Save to del.icio.us
Digg this
Google Bookmark this
Add to Facebook
Add to StumbleUpon